The water pump is the driving force of the wet curtain cooling project, so how to choose the right water pump and what matters to pay attention to?
1. Determine the location of the pump installation
Clarify the installation location of the pump, measure the distance between the water source and the pump, the area of the site where the pump will be used, and the height to which of the pump to supply water to the water pad.
2. Determine the selection of water pumps
According to the measured data, determine the suction stroke, head, and flow rate of the pump, and select the appropriate pump, typically a centrifugal pipeline pump or a self-priming submersible pump.
3. Determine the diameter of the water pipe of the wet curtain circulating water system
According to the caliber of the pump, the flow rate, the flow rate, etc., determine the diameter of the water inlet pipe and the diameter of the water supply pipe used in the wet curtain. At this step, it is necessary to calculate whether the water supply is sufficient, otherwise the wet curtain may not function properly in the future.
Fourth, choose the quality of the pump
Choose a high quality pump, as it will reduce the cost and trouble of maintenance, it is recommended to choose a large factory pump.
Fifth, pay attention to the details of engineering construction and installation
During the installation of the water pump, ensure the sealing of the pipeline interfaces, especially to prevent leaks and blockages. If possible, install a filter valve, a pressure valve, and a check valve to prevent minor issues during operation.
